To Turn Off Gas To Heater

NVC Series B-Vent

Lighting and Operating Instructions

FOR YOUR SAFETY READ BEFORE LIGHTING

WARNING:If you do not follow these instructions exactly, a ﬁre or explosion

may result causing property damage, personal injury or loss of life.

A. This heater has a pilot which must be lit manu-

ally. When lighting the pilot follow these instructions exactly.

B.BEFORE LIGHTING smell all around the heater area for gas. Be sure to smell next to the ﬂoor because some gas is heavier than air and will settle on the ﬂoor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any ﬁreplace

•Do not touch any electric switch

•Do not use any phone in your building

•Immediately call your gas supplier from a neigh- bor's phone. Follow the gas supplier's instruc- tions.

•If you cannot reach your gas supplier, call the Fire Department

C.Use only your hand to push in or turn the gas con- trol knob. Never use tools. If the knob will not push in or turn by hand, do not try to repair it, call a qualiﬁed service technician. Applying force or any attempted repair may result in a ﬁre or explosion.

D.Do not use this ﬁreplace if any part has been under water. Immediately call a qualiﬁed service technician to inspect the heater and to replace any part of the control system and any gas control which has been under water.

Lighting Instructions

1.STOP! Read the safety information above.

2.Turn off all electrical power to the ﬁreplace.

3.For MN/MP/TN/TP appliances ONLY, go on to Step 4. For RN/RP appliances turn the On/Off switch to “OFF” position or set thermostat to lowest level.

4.Open control access panel.

5.Push in gas control knob slightly and turn

clockwise to "OFF".

				PILOT	PILOT	OFF
				PILOT
t		1	F
t
lo				ON	ON
P
F			F
i		2
O		2	O
F
5		3		FFO
5	4	3
	4
Euro SIT			SIT NOVA		Honeywell

6.Wait ﬁve (5) minutes to clear out any gas. Then smell for gas, including near the ﬂoor. If you smell gas, STOP! Follow "B" in the safety infor- mation above. If you do not smell gas, go to the next step.

7.Remove glass door before lighting pilot. (See Glass Frame Removal section).

8.Visibly locate pilot by the main burner.

9.Turn knob on gas control counterclockwise

to "PILOT".

10.Push the control knob all the way in and hold. Immediately light the pilot by repeatedly depress- ing the piezo spark ignitor until a ﬂame appears. Continue to hold the control knob in for about one

(1) minute after the pilot is lit. Release knob and it will pop back up. Pilot should remain lit. If it goes out, repeat steps 5 through 8.

3/8" - 1/2"

•If knob does not pop up when released, stop and immediately call your service technician or gas supplier.

•If after several tries, the pilot will not stay lit, turn the gas control knob to "OFF" and call your service technician or gas supplier.

11.Replace glass door.

12.Turn gas control knob to “ON” position.

13.For RN/RP appliances turn the On/Off switch to “ON” position or set thermostat to desired setting.

14.Turn on all electrical power to the ﬁreplace.

1.Turn the On/Off switch to Off position or set the thermostat to lowest setting.

2.Turn off all electric power to the ﬁreplace if service is to be performed.

3.Open control access panel.

4.Push in gas control knob slightly and turn clock-

wise to "OFF". Do not force.

5.Close control access panel.

20000194

NVC39, NVC36, NVC43 specifications

Vermont Castings is known for its commitment to quality and craftsmanship, and its NVC series of gas stoves, including the NVC39, NVC36, and NVC43, exemplify this tradition. These models provide both warmth and aesthetic appeal, making them popular choices for homeowners seeking a blend of efficiency and style in their heating solutions.

The NVC39 is designed for larger spaces, boasting a heating capacity that can warm up to 2,000 square feet, making it suitable for open-concept living areas or larger rooms. It features a generous viewing area, allowing residents to enjoy the mesmerizing flames while creating an inviting atmosphere. With an impressive efficiency rating, the NVC39 ensures that fuel consumption is minimized, resulting in lower heating costs.

Moving to the NVC36, this model offers a slightly more compact design without compromising on power. It is an ideal choice for medium-sized rooms and comes equipped with the same high-efficiency rating as the NVC39. This model is particularly favored for its easy-to-use controls, allowing users to adjust the flame and heat output effortlessly. Its stunning cast iron construction not only provides durability but also enhances the classic aesthetic Vermont Castings is renowned for.

The NVC43 is the largest of the trio, making it perfect for those looking for a powerful heating solution for extensive spaces. With its capable output, it can effectively heat areas over 2,500 square feet. Like its counterparts, the NVC43 integrates modern technology with traditional design. It features an advanced ignition system that ensures reliable starting every time. Furthermore, it is designed with an oxygen depletion sensor, prioritizing safety by automatically turning off the unit if oxygen levels drop to unsafe levels.

All three models come with customizable options, allowing the user to personalize their stove with various finishes and styles. Add-on features like ceramic glass doors and optional blowers enhance their functionality and aesthetics. In addition, they incorporate a burn system that maximizes heat output while minimizing emissions, aligning with Vermont Castings' commitment to environmental stewardship.

Overall, the Vermont Castings NVC series combines advanced technology, character, and efficiency, providing homeowners with versatile options that meet both heating needs and design preferences. They are ideal for anyone seeking the practicality of modern heating with the beauty of classic craftsmanship.

Vermont Casting NVC43, NVC36, NVC39 warranty To Turn Off Gas To Heater, What to do if YOU Smell GAS

Models: NVC39 NVC36 NVC43