VCS4007 / VCS4017 / VCS4027 / VCS4037 / VCS5007 / VCS5017 / VCS5027 / VCS5037 Assembly
Step 4: Install the Side Shelf Supports
Parts Required:
(1)Left Side Shelf Support
(1)Left Condiment Tray
(1)Right Side Shelf Support
(1)Right Condiment Tray
(8)
Note: Only the right side assembly is shown in Fig. 4a and Fig. 4b. To install Left Side Support and Condiment Tray, repeat this step for the left side.
On the right side of the barbecue there are four threaded inserts, screw a bolt half way into each of the four threaded inserts. You will notice the bottom slot of the support has a 'Y' shaped slot and a 'keyhole' shaped hole above it. Take the Right Side Shelf Support and slide the top screw into the 'keyhole' and the bottom screw into the opening of the 'Y' shaped slot. Now take the Right Condiment Tray and align its holes over the two front bolts and gently push down until the bolts settle into the grooves of the tray.
Next: Gently push down on the support until the screw settles into the top of the groove. Do not fully tighten the support screws at this point.
Step 5: Attach Shelves
Parts Required:
(1)Right Shelf - S/B (Shown)
(1)Left Shelf - Solid
Place the Right Shelf - S/B (shown) on top of the supports making sure the holes are aligned and then snap into place on the supports. The inside lip of the shelf will slide between the grill shell and the shelf supports.
Push |
Bolts |
Bolts |
Fig. 4a |
Fig. 4b |
Then Snap |
Into Place |
Slide End |
On First |
Fig. 5 |
Page 3
