Vermont Casting VCS4006 Operation, LIGHTING THE SIDE BURNER if equipped, Shutting The Burner Off

Models: VCS4106 VCS3006 VCS5006 VCS5016 VCS3506 VCS5006BI VCS6006

1 36
Download 36 pages 8.83 Kb
Page 17
Image 17
LIGHTING THE SIDE BURNER (if equipped)

Operation

LIGHTING THE SIDE BURNER (if equipped)

WARNING: Never stand with your head directly over the Grill when preparing to light the side burner, to prevent possible bodily injury.

1.Turn the side burner control knob to HIGH (see Fig. 13).

2.Turn the Igniter Knob clockwise until the burner ignites. The burner should light within four clicks of the igniter. NOTE: Some models are equipped with an electronic ignter. Refer to page 6 for respective piezo and electronic igniter systems.

NOTE: Observe the flame pattern. Soft blue flames are normal ; hard blue flames or wavy yellow flames are not. You can adjust the flame with the air shutter below the control knob (see Fig 19). If yellow flames persist, refer to the Troubleshooting Guide on Page 22.

SHUTTING THE BURNER OFF

1.Turn the control knob counterclockwise to the HIGH position, then depress it and turn it to OFF. NEVER force the knob without depressing it, as that can damage the valve.

NOTE: Single burner model shown.

Fig. 13

Control

Igniter

knob

 

Page 11

Page 17
Image 17
Vermont Casting VCS4006, VCS6006 Operation, LIGHTING THE SIDE BURNER if equipped, Shutting The Burner Off, Control, knob