Vermont Casting VCS3506BI / VCS5006BI Assembly, Assemble Fascia Brackets Parts Required

VCS3506BI / VCS5006BI Assembly

Step 3: Assemble Fascia Brackets

Parts Required:

(1)Main Grill Unit

(1)Left Fascia Bracket

(1)Right Fascia Bracket

(4)#10 x 1/2” Bolts

(4)#10 Lock Nuts

Prop up the front of the Grill Unit on a 2” or 3” block of wood or some other similar item. Remove the two (2) 1/4”-20 x 3/8” bolts located at the top-right corner on the left and right side of the base assembly and loosen the two (2) front 1/4”-20 x 3/8” bolts as shown in the adjacent diagram.

Next: Attach the Right Fascia Bracket to the grill base by aligning the holes over the loosened bolts and gently pushing down on the Fascia until the bolts settle into the grooves.

Note: Ensure the bottom of the flanges on the Left and Right Fascia Brackets slides between the flange of the bottom cover and the console.

Then secure the rear of the Brackets to the Grill Unit using the 1/4”-20 x 3/8” bolt you initially removed. Secure the Brackets to the lower-front of the Grill Body by inserting two (2) #10 x 1/2” Bolts and two (2) #10 nuts as shown in the adjacent diagram.

1/4-20 x 3/8” Bolt (already assembled)

Fig. 3	1/4-20 x 3/8” Bolt
	(remove half way
	from base assembly)

Page 3