Step 5: Assemble the Grease Tray Front and Handle
Parts Required:
(1)Grease Tray Front
(1)Handle (with screws)
(2)#10 Bolts
(2) #10 Nuts
Remove the Grease Tray from the front of the Grill Base (Below the Control Console). Remove the protective plastic from the Grease Tray Front
and attach it to the front lip of the Grease Tray with the two (2) #10 Bolts and tighten using the two (2) #10 Nuts.
Next: Attach the handle to the tray with the two (2) screws supplied with the handle.
Note: Do not reinsert the Grease Tray into the Grill Base at this time.
Service Note: Due to the shallow depth of the grease tray, ensure it is cleaned frequently to avoid a possible “Grease Fire”.
VCS3506BI / VCS5006BI Assembly
Fig. 5
Page 5
