Use & Care Manual
ENGLISH
Troubleshooting
|
|
| |
| Cooktop not connected to proper | Have electrician verify that the proper | |
| electrical circuit. | rated cooktop voltage is being supplied | |
| Fuse is blown or circuit breaker is tripped. | to the cooktop. Have electrician replace | |
| fuse or reset circuit breaker. | ||
| No electricity to the cooktop. | Have electrician check your power | |
|
| supply. | |
| Cooktop is in lockout mode. | Unlock cooktop. | |
|
|
| |
Heating elements do not heat | Improper cookware is being used. | Select proper cookware as outlined in | |
properly |
| the Cooktop Operation section of this | |
|
| manual. | |
|
|
| |
Glass ceramic surface is see- | Under direct or bright lighting, you will | These are normal properties of black | |
through or appears to be red | sometimes be able to see through the | ceramic glass panels. | |
in color. | glass and into the chassis due to its |
| |
| transparent quality. You may also notice a |
| |
| red tint under these conditions |
| |
|
|
| |
|
| When powering on the unit make sure | |
Lock Key blocked after first | When first connecting electrically or | that no strong light is shining | |
after a power failure, any direct strong | direct over the touch control zone, it | ||
connecting or unresponsive | |||
light over the sensor area may affect the | can compromise the | ||
touch control. | |||
touch control functionality. | calibration resulting in an unresponsive | ||
| |||
|
| touch control. | |
|
|
|
16
