| Use & Care Manual | |
|
|
|
|
| ENGLISH |
|
|
|
CONTROL INSTRUCTIONS FOR USE | The display (ref.4) and the “Peacock Tail” (ref.6) show | |
| the power level, updated in real time. | |
WARNING
This touch control works using optical light sensing technology. When first connecting electrically or after a power failure, any direct strong light over the sensor area may affect the touch control functionality. When powering on the unit make sure that no strong light is shining direct over the touch control zone, it can compromise the
When the cooktop is connected to the electrical voltage supply all lights and digits turn on to indicate a proper activation. This operation will be completed after few seconds, the control turns off automatically. Now the cooktop is ready for operations.
Switching the control on
Eventually hold the [LOCK] key in case the commands are locked (see that the lock led is on and turns off after a few seconds).
Touch the main [ON/OFF] key in order to make each single zone available for selection.
All the displays show power level “0”, if no actions are performed the control shuts down again after about 10 seconds.
Elements setting
Touch the proper [ON] key (ref.2) in order to select the desired zone: the HOT SURFACE (ref.3) indication starts flashing, waiting for a user input.
5a
4
2 | 1 |
3
Figure. 6
Touch the slide bar to set the power level (levels 0 to 9 are available), moving the finger along it or directly touching the desired value.
After a 5 seconds
Touch [ON] key to confirm the value before the
The following picture represents the Full Power Scale whereas the control uses all the available power range, from 0% up to the 100% corresponding to level 9.
Level 4 corresponds to 15% of the available power.
6
7
Figure. 7
Using the Low Power Scale
Once a cooking zone has been selected, touch the [LOW TEMP] key (ref.8) in order to enable the Low Power Scale (ref.9) then set the power level in the usual way.
9 |
8
Figure. 8
10
