Section 2- Installation

K. VM Standard Shelf Installation InstructionsStep 1

Make sure plastic end caps are on the front left and right sides of the shelf before the installation process.

*Note: Putting shelving in the cabinet without end caps will cause damage to the interior!

Step 3

Insert the front shelf peg into the support hook on the side of the cabinet interior. Keep opposite shelf peg between front of upright support and door.

*Note: VM-1’s do not have an upright support, place in opposite hook area.

9

Section 2- Installation

Step 2

Tilt shelf at an angle and insert into cabinet.

Step 4

Position the rear of the shelf at the desired level using the peg from step 2 as the pivot point. Rest the rear corner of the shelf on the rear side support first, then lift and pivot shelf on to the supporting center of the cabinet interior.