Section 5 - Service

 

Section 5 - Service

D. VM-2SL Sliding Glass Door Shim Insertion Instructions

If VM-2SL cabinet has gap(s) between the sliding glass door and frame, contact factory and request door roller assembly shim(s) under part number 05314501. Following are step by step guidelines that will assist in closing any gap(s).

*Note: Pay close attention to roller assembly location and numbered arrows!

Instructions:

If "Gap" is around this area (arrow 1), place shim(s) under roller assembly where the opposite arrow with "1" is located (diagonally across).

If "Gap" is around this area (arrow 2), place shim(s) under roller assembly at the same location.

If "Gap" is around this area (arrow 3), place shim(s) under roller assembly where the opposite arrow with "3" is located (diagonally across).

If "Gap" is around this area (arrow 4), place shim(s) under roller assembly at the same location.

Figure 1

20