Section 4 - Maintenance

 

Section 4 - Maintenance

SECTION 4

MAINTENANCE

A.Cleaning and Proper Detergent Use

Follow requirements of local health authorities.

1.Use a detergent-sanitizer or a mild detergent (neutral) or mildly alkaline (recommended for metal surfaces) followed by a sanitizing rinse solution. These chemicals are necessary to kill or deactivate the micro-organisms on the surface areas in contact with stored food. Choose these chemicals carefully. Some are toxic and should only be used on non-food surfaces.

CAUTION:

DO NOT USE ABRASIVE CLEANING SOLVENTS!!!!

Never scour any part of your refrigerator. Scouring powders or chemicals may cause damage by scratching or dulling the gleaming surface finish. Use alkaline, alkaline chlorinated or non-chloride cleaners.

2.Avoid cleaners containing quaternary salts! They can also attack stainless steel and cause pitting and rusting.

3.When using these products, it is important to follow label directions exactly to obtain the correct cleaning action.

B.Initial Cleaning of Cabinet

CAUTION:

DO NOT USE ABRASIVE CLEANING SOLVENTS!

&

DO NOT USE ALCOHOL OR AMMONIA BASED CLEANERS ON PLASTIC PARTS!

Prior to placing your new refrigerator into operation, it is advisable that the interior be washed thoroughly with a mild detergent and water solution. Rinse with clear water and a sanitizing solution. Allow cabinet to air dry.

C.Periodic Cleaning

It is more convenient to clean your merchandiser refrigerator when the product load is at its lowest point.

1. Daily Exterior Surface Cleaning

Cleaning and sanitizing agents for stainless steel and aluminum exteriors should be used daily.

14