Section 2- Installation

 

Section 2- Installation

L. Assembling and Installing VM-2 & VM-2SL Beverage Organizer Shelf (continued)

Step 5

Hold the divider evenly. Grasp the divider above the back hook and gently snap the divider over the rear support rod on the shelf.

Step 6

Make sure that the rear bar is seated within the hook snugly as shown.

Step 7

After installing all product dividers to the proper spacing, place the product glides in between the dividers and snap them gently on to the shelf rails.

Step 8

Place completed beverage organizer shelf into the Victory Merchandiser (VM). Locate the front support one or two spaces below the rear gravity feed.

Step 9

Add the product of choice on to the beverage organizer shelf.

“End Of Section, Click Here For Table Of Contents”