Section 5 - Service

 

Section 5 - Service

D.VM-2SL Sliding Glass Door Shim Insertion Instructions (continued)

1.If cabinet has gap(s) between sliding glass door and frame, place shim(s) as shown on page 19.

2.Remove door(s) from the frame by grasping firmly on both ends and lifting the door(s) up towards the top frame and pulling out towards you (Fig.2).

Figure 2

3.Turn door(s) over and remove two nuts from the roller assembly with a 1/4” nut driver (Fig.3).

Figure 3

*Note: Be careful not to lose the nuts when taking out the roller assembly. Extra nuts do not come with the shim(s) when requested.

21