Using the Magnify Feature

1Press the MAGNIFY (ON) button The projector enters MAGNIFY mode.

2Press the POSITION button, then use the , , , buttons to select the area to enlarge and then press the POSITION button again to confirm your selec- tion.

3Press the , buttons to zoom in and out of the selected area.

Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore the screen to normal. (The projector will also automatically exit MAG- NIFY mode if there is a change in the input signal's state.)

NOTE:

The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT or VIDEO feature is used, or if there is a change in the input signal's state.

Freezing the Screen

1Press the FREEZE button

The

icon appears and the screen will freeze at the current image. Press

the FREEZE button again and the

appears as the projector exits

FREEZE MODE.

 

NOTE:

The projector will automatically exit FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, BLANK ON/OFF, or MENU ON/OFF feature is used, or if there is a change in the input signal's state.

If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image may remain as an afterimage. Do not leave the projector in FREEZE mode for too long.

ViewSonic PJ751

19

Page 22
Image 22
ViewSonic PJ751 manual Using the Magnify Feature, Freezing the Screen