Using the menus
The projector is equipped with
Below is the overview of the OSD menu.
Main menu icon
Highlight
Sub-menu 
Current input 
signal
Screen Color | Off |
Aspect Ratio | Auto |
Keystone |
|
Position | ENTER |
Phase | 16 |
H. Size | 0 |
Zoom |
|
3D Sync | On |
3D Sync Invert | Disable |
Color Management |
|
Analog RGB | MENU Exit |
Status
Go to the previous page or to exit.
To use the OSD menus, please set them to your familiar language first.
1.Press MENU/EXIT on the projector or MENU on the remote control to turn the OSD menu on.
3.Press 
to highlight Language and press 
/ 
to select a preferred language.
Screen Color | Off |
Aspect Ratio | Auto |
Keystone |
|
Position | 16 |
Phase | |
H. Size | 0 |
Zoom |
|
3D Sync | On |
3D Sync Invert | Disable |
Color Management |
|
Analog RGB | MENU Exit |
2.Use 
/ 
to highlight the SYSTEM SETUP: Basic menu.
Language | English |
Projector Position | Front Table |
Auto Power Off | Disable |
Blank Timer | Disable |
Panel Key Lock | Off |
Timer Controller | Disable |
Splash Screen | ViewSonic |
Message | On |
Analog RGB | MENU Exit |
Language | English |
Projector Position | Front Table |
Auto Power Off | Disable |
Blank Timer | Disable |
Panel Key Lock | Off |
Timer Controller | Disable |
Splash Screen | ViewSonic |
Message | On |
Analog RGB | MENU Exit |
4.Press MENU/EXIT twice* on the projector or Exit on the remote control to leave and save the settings.
*The first press leads you back to the main menu and the second press closes the OSD menu.
: DISPLAY | : SYSTEM SETUP: Basic |
: PICTURE | : SYSTEM SETUP: Advanced |
: SOURCE
: INFORMATION
