9.Tighten the screw that secures the lamp.
CAUTION
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screw.
10.Ensure the handle is fully laid flat and locked in place.
11.Replace the lamp cover on the
projector.
12.Tighten the screws that secure the lamp
cover.
CAUTION
• Loose screw may cause a bad connection, which could result in malfunction.
• Do not over tighten the screws.
13.Restart the projector.
CAUTION
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
14. After the startup logo, open the
Press MODE/ENTER on the projector or EnterReset Cancel on the remote control. The Lamp Settings page
is displayed. Press
to highlight Reset lamp timer and press MODE/ENTER on the projector or Enter on the remote control. A warning message is displayed asking if you want to reset
the lamp timer. Highlight Reset and press MODE/ENTER on the projector or Enter on the remote control. The lamp time will be reset to '0'.
CAUTION
Do not reset if the lamp is not new or replaced as this could cause damage.
