4. SYSTEM SETUP: Basic menu
5. SYSTEM SETUP: Advanced menu
Function | Description | |
Language | Sets the language for the | |
"Using the menus" on page 21 for details. | ||
| ||
|
| |
Projector | The projector can be installed on a ceiling or behind a screen, or | |
Position | with one or more mirrors. See "Choosing a location" on page 11 | |
for details. | ||
|
| |
Auto Power | Allows the projector to turn off automatically if no input signal | |
Off | is detected after a set period of time. See "Setting Auto Power | |
Off" on page 44 for details. | ||
Blank Timer | Sets the image blank time when the Blank feature is activated, | |
once elapsed the image will return to the screen. See "Hiding the | ||
| image" on page 33 for details. | |
|
| |
Panel Key | Disables or enables all panel key functions except II POWER | |
Lock | on the projector and keys on the remote control. See "Locking | |
| control keys" on page 33 for details. | |
Timer | Sets the | |
Controller | between 30 minutes and 12 hours. | |
|
| |
Splash | Allows you to select which logo screen will be displayed during | |
Screen | projector | |
Black screen, or Blue screen. | ||
Message | Selecting On displays the current information on the screen | |
when the projector is detecting or searching for a signal. | ||
| ||
| Selecting On enables the function and the projector cooling time | |
Quick | will be shortened to a few seconds. | |
| ||
Cooling | If you attempt to restart the projector right after the quick | |
| cooling process, it may not be turned on successfully and | |
| will rerun its cooling fans. | |
High Altitude | A mode for operation in high altitude areas. See "Operating in a | |
Mode | high altitude environment" on page 34 for details. | |
|
| |
| Enables or disables the DCR (Dynamic Contrast Ratio) function. | |
| Selecting On enables the function and the projector will | |
| automatically switch the lamp mode between normal and | |
DCR | economic modes according to the input image detected. | |
This function is only available when a PC source is in use. | ||
| ||
| After enabling DCR, frequent lamp mode switching may | |
| shorten lamp life and noise level will vary during operation. | |
|
|
