Personalizing the projector menu display
The
•Menu Display Time in the SYSTEM SETUP: Advanced > Menu Settings menu sets the length of time the OSD will remain active after your last key press. The time length
ranges from 5 to 30 seconds in 
/ 
to select a suitable time frame.
•Menu Position in the SYSTEM SETUP: Advanced > Menu Settings menu sets the OSD position in five locations. Use 
/ 
to select a preferred position.
•Language in the SYSTEM SETUP: Basic menu sets your familiar language for the OSD menus. Use 
/ 
to select your language.
•Splash Screen in the SYSTEM SETUP: Basic menu sets a preferred logo screen to be displayed during projector 
/ 
to select a screen.
Shutting down the projector
1. Press II POWER and a confirmation message is displayed prompting you.
If you don't respond in a few seconds, the message will disappear.
2. Press II POWER a second time. The POWER indicator light flashes blue, the projection lamp shuts down, and the fans will continue to run for approximately 90 seconds to cool down the projector.
3. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time.
CAUTION
•To protect the lamp, the projector will not respond to any commands during the cooling process.
•To shorten the cooling time, you can also activate
the Quick Cooling function. See "Quick Cooling" on page 40 for details.
•Do not unplug the power cord before the projector shutdown sequence is complete or during the
•If the projector is not properly shut down, to protect the lamp, when you attempt to
