ViewSonic VS13835 warranty Important information for Intellectual Stack

STACK menu settings

3.7 Important information for Intellectual Stack

This section provides important information for setting up the Main and Sub projectors, not explanations on operating the menus. Read all information carefully.

●To use Intellectual Stack, one projector must be set to Main and the other set to Sub.

●When stacking the two projectors, the control panel of the projector placed underneath cannot be operated. It is therefore strongly recommended to set the projector underneath to Sub and the projector on top to Main.

●All buttons except the STANDBY/ON button on the control panel of the Sub projector are disabled. Operate the projectors with the control panel of the Main projector or the remote control.

●Pressing the STANDBY/ON button of the Sub projector does not allow you to turn off only the Sub projector. The Main and Sub projectors turn off when the button is pressed for more than 3 seconds. And pressing the button does not turn on the Main or Sub projector.

●The Main projector is capable of receiving the remote control signals but not the Sub projector so the remote control should be pointed at the Main projector.

●If a wired remote control is used, connect the cable to the Main projector instead of the Sub projector.

●For simple PC mouse & keyboard functions, connect both the Main and Sub projectors to your computer with USB cables. (Operating Guide → Using as a simple PC mouse & keyboard)

●AUTO SEARCH function is disabled when the projector is used in Intellectual Stack.

●Network communication to Sub and Web Control on Sub cannot turn on the Sub projector. The Sub projector can only be controlled through the Main projector.

●Remote Control function on Web Control of the Sub projector is disabled. (Network Guide → 3.11 Remote Control)

●If you try to turn on the projectors using the Power on & Display on feature on the Messenger function, the projectors will exit Intellectual Stack and display the specified message. To start Intellectual Stack again, re-select MAIN/SUB on both projectors in the STACK MODE dialog, or turn off and on both projectors again.

●The Main and Sub projectors have the following common settings.

-Muting feature (Operating Guide → Temporarily muting the sound)

-Magnifying feature (Operating Guide → Using the magnify feature)

-ASPECT and OVER SCAN (Operating Guide → IMAGE menu)

-COMPUTER IN (Operating Guide → INPUT menu)

-MESSEAGE (Operating Guide → SCREEN menu)

-MY BUTTON (Operating Guide → OPTION menu)

-TEMPLATE (Operating Guide → SCREEN menu)

(continued on next page)	244	Pro9500
ViewSonic