ViewSonic VS13835 Communication Type, Serial Settings, Baud Rate, Parity, Transmission Method

OPTION menu

Item		Description
		COMMUNICATION TYPE
		Select the communication type for transmission via
		the CONTROL port.
		NETWORK BRIDGE ó OFF
		NETWORK BRIDGE: Select this type, if it is required
		to control an external device as a network terminal,
		via this projector from the computer.
		The CONTROL port doesn't accept RS-232C
		commands (6. Network Bridge Function in the
		Network Guide)
		OFF: Select this mode to receive RS-232C
		commands using the CONTROL port.
		• OFF is selected as the default setting.
		• When you select the NETWORK BRIDGE, check
		the item, TRANSMISSTION METHOD.
		SERIAL SETTINGS
		Select the serial communication condition for the
		CONTROL port.
		BAUD RATE
SERVICE	COMMUNICATION	4800bps ó 9600bps ó 19200bps ó 38400bps
(continued)	(continued)	PARITY
		NONE ó ODD ó EVEN
		• The BAUD RATE is fixed to 19200bps and PARITY
		is fixed NONE when the COMMUNICATION TYPE
		is set to OFF.
		TRANSMISSION METHOD
		Select the transmission method for communication by
		the NETWORK BRIDGE from the CONTROL port.
		HALF-DUPLEX ó FULL-DUPLEX
		HALF-DUPLEX: This method lets the projector
		make two way communication, but only one
		direction, either transmitting or receiving data, is
		allowed at a time.
		FULL-DUPLEX: This method lets the projector
		make two way communication, transmitting and
		receiving data at the same time.
		• HALF-DUPLEX is selected as the default setting.
		• If you select HALF-DUPLEX, check the setting of
		the item RESPONSE LIMIT TIME.

(continued on next page)

ViewSonic 64 Pro9500