Viking DMOS200SS manual Installation Instructions, Unpacking and Examining Your Microwave Oven

Installation Instructions

Unpacking and Examining Your Microwave Oven

Remove all packing materials from inside the microwave oven cavity; however, DO NOT REMOVE THE WAVEGUIDE COVER, which is located on the right cavity wall. Read enclosures and SAVE the Installation/Use and Care Manual.

Check the microwave oven for any damage,

such as misaligned or bent door, damaged door seals and sealing surfaces, broken or

loose door hinges and latches and dents inside the cavity or on the door. If there is

any damage, do not operate the microwave oven and contact your dealer or

VIKING AUTHORIZED SERVICER.

Choosing a Location for Your Microwave Oven on the Counter

You will use the microwave oven frequently so plan its location for ease of use. It’s wise, if possible, to have counter space on at least one side of the micro- wave oven. Allow at least 2 inches on the sides, top and at the rear of the microwave oven for air circulation.

Choosing a Location for Your Built-in Microwave Oven

Your microwave oven can be built into a cabinet or wall by itself or above an oven. To install a microwave oven above a built-in oven, the applicable trim kits are as follows:

VIKING Designer Series:

•For installation with an electric 27" wide single oven (DESO170 / DESO175) use built-in trim kit DMTK270.

Built-in Trim Kit

Frame Assembly

Microwave oven Front

•For installation with an electric 30" wide single oven (DESO100 / DESO105) use built-in trim kit DMTK300.

Do not build in above any other gas or electric oven.

6