Viking DMOS200SS manual Over Oven Installation

See built-in trim kit installation instructions for proper location when building in above the specified ovens. Carefully follow both the oven installation instruc- tions and built-in trim kit instructions.

The opening in the wall or cabinet must be within the following dimensions:

AHEIGHT : 16 3/4" - 17"

BWIDTH : 24 3/8" - 24 11/16"

CDEPTH : minimum 20"

Outlet should NOT be in the shaded area as indicated.

Over Oven Installation

2"

1.If the dimension of DEPTH (C) is more than 21", the outlet location may be any area on the rear wall.

2.The floor of the opening should be

constructed of plywood strong enough
to support the weight of the microwave			6"
oven and floor load (about 100
pounds). The floor should be level for		4"
proper operation of the microwave
oven. Be sure to check the local A
building code as it may require that		4"
the opening be enclosed with sides,
ceiling and rear partition. The proper	B		C
functioning of the microwave oven
does not require the enclosure.

The built-in trim kit includes all the necessary parts and easy-to-follow instruc- tions for installation as well as location of the power supply.

The ease of assembly for these kits will allow installation into an existing wall opening in less than an hour (if power outlet is already properly located).

All it takes are four steps and a Phillips screw driver.

7