Product Care

Cleaning and Maintenance

Any piece of equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception. Your range must be kept clean and maintained properly. Before cleaning, make sure all controls are in the “OFF” position. Disconnect power if you are going to clean thoroughly with water.

Surface Burners

Wipe up spill-overs as soon as possible after they occur and before they get a chance to burn in and cook solid. In the event of a spill-over, follow these steps:

Allow the burner and grate to cool to a safe temperature level.

Lift off the burner grate. Wash in warm soapy water.

Remove the burner head and burner base and clean.

Burner Heads

The surface burner heads should be routinely removed and cleaned. ALWAYS clean the burner heads after a spill-over. Keeping the burner heads clean will prevent improper ignition and uneven flames. To clean, pull burner head straight up from the burner base. Wipe off with warm, soapy water and a soft cloth after each use. Use a non-abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad for cooked- on foods. If ports on burner head are clogged, clean with a straight pin. DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports. Dry thoroughly after cleaning. For

best cleaning and to avoid possible rusting, DO NOT clean in dishwasher or self- cleaning oven. When replacing the burner head, carefully align the locator key in the outer edge below the burner ports with the small notch in the top front edge of the

burner base. This will align the burner port locator key burner base with the ignitor.

notch

Burner Base

To clean, pull burner base straight up from the burner flange. Wipe off with warm, soapy water and a soft cloth after each use. Use a non-abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad for cooked-on foods. When replacing burner base, carefully align the three ribs underneath the burner base with the three grooves in the burner flange. Make sure the burner base is level by aligning the rib that has a pin with the groove that has a hole.

Cleaning and Maintenance

Note: For stubborn stains, use a non abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad.

Cleaning Tip: For difficult to clean burner heads and bases, place parts in a zip seal bag with ammonia.

Burner Flange

After the burner flange has cooled, it should be wiped with hot soapy water but do not allow water to run or drip in the large center opening. DO NOT use steel wool, abrasive cloths, cleanser, or powders. To remove encrusted materials, soak the area with a hot towel to loosen the material, then use a wooden or nylon spatula.

DO NOT use a metal knife, spatula, or any other metal tool to scrape the burner flange.

Wipe up any spills which remain on the sealed top surface.

Replace burner base, burner head, and grates after drying thoroughly.

Control Panel

DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the control panel. Use hot, soapy water and a soft clean cloth.

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by

pushing firmly onto stem. DO NOT use any cleaners containing

ammonia or abrasives. They could remove the graphics from the knob. Product Care

50

51

Page 26
Image 26
Viking F21233A manual Cleaning and Maintenance

F21233A specifications

The Viking F21233A is a remarkable piece of engineering that caters to the modern need for efficiency and performance. As the world becomes increasingly reliant on technology, the F21233A stands out with its innovative features and robust design.

One of the standout attributes of the Viking F21233A is its powerful engine. Equipped with a state-of-the-art combustion system, the vehicle delivers exceptional power while maintaining low emissions. This not only enhances performance but also contributes to a greener environment, aligning with contemporary eco-friendly standards.

The F21233A also boasts an advanced drivetrain system that ensures optimal traction and handling under various conditions. This technology includes an all-wheel-drive feature that allows for seamless transitions between different terrains, making it an ideal choice for both urban commuting and off-road adventures. Drivers can expect a smooth and responsive experience, no matter where they venture.

Safety is paramount in the design of the Viking F21233A. The vehicle comes equipped with multiple safety features, including advanced airbag systems, electronic stability control, and adaptive cruise control. These technologies work in unison to provide a secure driving environment, minimizing the risk of accidents and enhancing overall driver confidence.

The interior of the F21233A is designed with comfort and convenience in mind. High-quality materials ensure a luxurious feel, while an ergonomic layout provides ease of use. The vehicle includes a cutting-edge infotainment system that integrates seamlessly with smartphones, allowing for hands-free calls, navigation, and entertainment options, ensuring that drivers stay connected while on the road.

Moreover, the Viking F21233A incorporates smart technology such as automated parking assistance and lane-keeping assistance, further enhancing driving comfort and safety. These features showcase the vehicle's capability to adapt to contemporary driving demands, making it suitable for both tech-savvy users and those seeking convenience.

In summary, the Viking F21233A combines power, safety, and technology in a sleek package that caters to modern driving needs. With its outstanding features and innovative characteristics, it stands as a testament to the evolution of automotive engineering, appealing to a wide range of consumers who prioritize performance and safety. Whether for daily commutes or adventurous excursions, the F21233A offers a compelling option for today's drivers.