KeyCard/TMC DriveCard theft protection system

Displaying the radio pass data

You can use the KeyCard supplied with your set to display the radio pass data such as the model name, product number (7 6..) and serial number.

Please refer to the section on “DSC pro- gramming - READ KC”.

The freely selectable text with a maximum of 48 characters can be programmed by any dealer who has the required equipment available.

Each time you turn on your system with the second KeyCard, the programmed text will appear in the display.

Care of your KeyCard/

TMC DriveCard

To ensure that the cards will function pro- perly it is important that the contacts are free from any foreign particles. Avoid direct skin contact.

Never leave the cards exposed to direct sunlight.

Short Additional Memory (S.A.M.)

The second KeyCard available from your specialised dealer allows you to read out short information under the DSC menu item “READ KC”. This information will run throu- gh the display and could include, for examp- le, the phone number of your car repair ser- vice or the emergency call number of your automobile association.

The freely selectable text with a maximum of 162 characters can be programmed by any dealer who has the required equipment available.

Turn On Message (T.O.M.)

The second KeyCard available from your specialised dealer also allows you to dis- play a special turn-on message each time the radio is switched on.

Flashing light as visual theft protection

Flashing KeyCard tongue

Once you have parked your vehicle and re- moved the KeyCard, the KeyCard tongue can be programmed to flash as an extra anti- theft device.

Important: it is necessary that the positive power supply line and the permanent +12 V lead are connected such as described in the installation instructions.

“LED ON” must be selected in the DSC mode.

If necessary, please refer to the section on “DSC programming - LED”.

Switching off the flashing light

The flashing light can be switched off by selecting “LED OFF” in the DSC menu.

If necessary, clean the KeyCard contacts using a cotton swab dipped in rubbing alco- hol.

When outside of the vehicle, keep the TMC DriveCard in its cover.

Never bend the KeyCard or Drive- Cards. This could result in their de- struction.

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

13

Page 13
Image 13
Viking TMC 148 operating instructions KeyCard/TMC DriveCard theft protection system