DSC Programming
SHARX | Switches the bandwidth in |
| Adjusts the seek tuning sen- |
| the FM frequency range. |
| sitivity. |
| When there are a large |
| “LO” stands for local recepti- |
| number of stations within |
| on. |
| your current reception ran- |
| “DX” stands for distant re- |
| ge, use << >> to switch to |
| ception. |
| SHARX ON which will pre- |
| Select “LO 3” if you want to |
| vent most interference from |
| receive strong stations in |
| adjacent radio stations. |
| the local area, select “DX 1” |
| This function has been set |
| if you want to tune into wea- |
| to “SHARX ON” at the facto- |
| ker stations which are furt- |
| ry. |
| her away. |
LED ON | Here you can choose bet- | TA VOL | Adjusts the traffic announce- |
| ween LED ON or LED OFF. |
| ment and warning beep vo- |
| With LED ON, the KeyCard |
| lume from between 0 to 66. |
| tongue will flash for extra |
| The traffic information will |
| theft protection when the |
| then come through at this |
| unit has been switched off |
| volume, if the standard volu- |
| and the KeyCard removed. |
| me is lower. |
|
|
| If the standard volume is set |
BEEP | Acknowledgement tone for |
| higher than the TA VOL le- |
| vel, then the traffic informati- | ||
| all functions which require a |
| |
|
| on will be played at the stan- | |
| key to be pressed for more |
| |
|
| dard volume. | |
| than one second. |
| |
|
|
| |
| The volume can be adjusted |
|
|
| from between 0 to 9. | SCANTIME | Use this function to set the |
| (0 = off) |
| scan time (5 to 30 sec.) for |
|
|
| the radio or CD player. |
STEREO/MONO
Switch modes by pressing
<< >>.
The mode selected will ap- pear briefly in the display. The radio will automatically switch to STEREO playback each time it is switched on.
AM ON/OFF It is possible to block out one or both AM wavebands (MW/LW).
This can be useful to limit the wavebands available to those you really want to use and reduces the number of times you are required to press BND.
AM ON – all wavebands
MW OFF – LW, FM
LW OFF – MW, FM AM OFF – FM
LOUDNESS Loudness boosts the bass sound at low volume to pro- duce a more natural sound. LOUD 1 - low boost LOUD 6 - highest boost
30
