Activating stored areas or roads selection

TMC –Traffic Message Channel

DEUTSCH

•Use / to select “MOTORWAY”, for example, and enter the code number for the motorway (“007” for the M7).

•Use << >> to select the input position (the input field will flash).

A maximum of two motorway numbers can be displayed at the same time. Use << >> to select the other numbers.

•Use / to enter the first digit of the road selected, select the next input po- sition, etc.

Once you have completed your entry,

•press TMC for approx. 2 sec.,

“A ROAD” will appear in the display. Now you can enter 5 A roads by their three- digit code (as described for MOTORWAY).

If you do not want to enter an A road,

•press TMC briefly.

You can select and store up to 5 motorways and 5 A roads and activate them, as nee- ded.

Notes:

The cursor will not move to the next input field unless the entry in the last field is a real road contained in the data of the TMC DriveCard used.

The amount of information provided will increase with the number of road numbers entered.

As a result, it is advisable to enter only as many road numbers as necessary (max. 5 motorways and 5 A roads).

Following the input of all of the road num- bers desired, you can activate the input or store it on a station selection key.

Activating the input

If you would like to activate the information entered without storing it on one of the sta- tion selection keys,

•press TMC for approx. 2 sec.

Storing the input

If you would like to store the information entered on one of the station selection keys,

•press the corresponding station selec- tion key 1 - 5 for approx. 1 sec. (beep).

Overwriting (altering) the input

It is possible to overwrite (alter) the existing information entered. The new entry must be stored to delete the old entry.

Deleting the input

You can delete the area selected if you

•press SC briefly.

All of the areas stored on a station selection key will be deleted if you

•press SC for approx. 1 sec.