SCAN will also stop if you

press DSC, SRC, , << >> or /.

Clock - Time

This car radio has been equipped with a built-in clock which automatically takes ad- vantage of RDS to ensure highly accurate time-keeping.

Setting the clock

a)automatically

The clock is set automatically when the radio is tuned into an RDS station which has the “CT” (clock time) function.

b)manually with DSC-CLOCKSET

Press DSC briefly, “CLOCKSET” will appear in the display.

Press << >> to set the hours/minu- tes. Press / to move the flashing cursor to a different position.

After you have set the clock, press briefly to store the new setting.

Displaying the clock

You can set the clock to permanent display in both the radio and CD modes.

If you select another function, e.g. a diffe- rent radio station, the clock will disappear from the display for approx. 8 sec. and show the function selected.

To switch between display modes

press LD for approximately 2 sec.

Correcting the clock after the power has been disconnected

If the radio has been disconnected from its power source for a longer period of time, “0:00” will appear in the display when it is re-connected.

The time will be set automatically by RDS- CT, but can also be adjusted manually if desired.

You will not have to set the time manually unless it is not possible to receive an RDS station with CT (clock time).

Deactivating the hour correction function

In the DSC menu it is possible to switch off the hour correction function with “CLK MAN/ CLK AUTO”. An automatic correction for minutes will continue to take place.

This is useful if you would like to display the time for a different time zone, for example.

If necessary,

Press DSC briefly and

press / as often as required until “CLK MAN/CLK AUTO” appears in the display.

To deactivate the hour correction function press << >> to select “CLK MAN”.

Press << >> to set the hours/minutes.

26

Page 26
Image 26
Viking TMC 148 Clock Time, Setting the clock, Displaying the clock, Deactivating the hour correction function