Viking TMC 148 operating instructions Switching to CD mode

Models: TMC 148

1 33
Download 33 pages 2.52 Kb
Page 25
Image 25

CD mode

You can use this car radio to play CDs.

Note:

Use only standard circular CDs measuring 12 cm in diameter!

CDs measuring 8 cm in diameter or CDs in different shapes such as a butterfly or beer mug are not suitable for playback using this equipment.

This is very likely to result in the destruction of the CD or the CD drive.

We assume no liability for damage to the equipment caused by playing unsuitable CDs.

Switching to CD mode

A CD is inserted in the car radio, “CD” ap- pears in the display.

Use SRC to switch the sound source:

Press SRC repeatedly until the CD functions appear in the display (track number, elapsed playing time).

Inserting a CD

Switch on the car radio.

Insert a CD (with the label facing up). Never use force.

The CD will be transported to its playing position automatically. CD playback will start.

Removing a CD

Press SRC for approx. 1 second. The CD will be ejected.

To protect the CD mechanism, do not im- pair or try to help the automatic insertion and ejection of the disc in any way.

If the CD is not removed from the drive wi- thin approximately 30 seconds, it will be re- inserted automatically.

Selecting tracks

After you insert a CD into the car radio, the CD functions will appear in the display.

/ Track selection Up

Down

If you press once only, the track play- ing will re-start.

Fast forward, audible (CUE).

Hold down as long as necessary.

Fast reverse, audible (REVIEW). Hold down as long as necessary.

The rocker switch acts as a sequence switch so that you can skip over several tracks if you press it repeatedly.

The number of the track playing will appear beside “T” in the display.

MIX

CD tracks can be played back in random order. To indicate that MIX is switched on, “MIX CD” will appear in the display when you switch to the CD mode and each time a new track begins to play.

To switch MIX on/off:

Press 3/MIX briefly.

If “MIX OFF” appears, the function is not active.

SCAN

Use this function to scan all of the CD tracks.

To start the Scan function:

Press SC briefly, “CD SCAN” will ap- pear in the display.

The titles will be scanned one after the other in ascending order.

To stop the Scan function:

Press SC once again briefly.

The track currently scanned will continue to play.

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

25

Page 25
Image 25
Viking TMC 148 operating instructions Switching to CD mode