DSC Programming

The car radio has been equipped with DSC (Direct Software Control) to allow you to customise certain programmable, basic set- tings to suit your personal needs and prefe- rences and then store them.

The basic settings for this audio equipment were made at the factory.

In the following you can find an overview of these settings, so that you can always reset to them if desired.

If you wish to alter any of the programming,

press DSC.

Use the rocker switch and to select and adjust the functions described in the follo- wing. The display will show you the setting you have selected.

/ Select function

<<>> Adjust/recall value

CLOCKSET

To set the clock manually.

READ KC

To read out the KeyCard

 

Press << >> to set the

 

data.

 

hours/minutes. Move the

 

The card supplied with the

 

flashing cursor to the next

 

radio is used to display the

 

position by pressing / .

 

model name, type number

 

To store the setting selec-

 

(7 6..) and the serial num-

 

ted, press briefly.

 

ber.

 

Also refer to the section on

 

Using the second card it is

 

“CLOCK”.

 

possible to display data en-

 

 

 

tered by your specialised

VOL FIX

Use this function to select

 

dealer. (See the section on

 

“Short Additional Memory

 

the volume at which the ra-

 

 

 

S.A.M.”).

 

dio is set when it is switched

 

 

 

If you remove the KeyCard

 

on. Adjust the desired volu-

 

 

 

during the reading process,

 

me level with << >>. When

 

 

 

“READ KC” will appear on

 

adjusted to “VOL 0”, the sy-

 

 

 

the display panel.

 

stem will come on at the vo-

 

 

 

 

 

lume selected before it was

 

 

 

switched off.

LEARN KC

You can “train” a second

 

 

 

KeyCard.

TMC-HELP

If “TMC-HELP” is switched

 

Please read the information

 

in the section on “KeyCard

 

to “ON”, this function provi-

 

 

 

theft protection system” -

 

des additional information,

 

 

 

“Training a second Key-

 

such as selected areas or

 

 

 

Card”.

 

roads.

 

 

 

 

PTY LANG

You can select the language

 

 

 

used to indicate the program

 

 

 

type:

 

 

 

DEUTSCH or ENGLISH

 

 

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

29

Page 29
Image 29
Viking TMC 148 operating instructions DSC Programming