Radio operation with RDS (Radio Data System)

Press AF for approx. 2 sec. until “REG OFF” appears in the display.

Each time you switch on the car radio, “REG ON” or “REG OFF” will appear in the dis- play.

Selecting a waveband

The following wavebands are available: FM 87.5 - 108 MHz

MW 531 - 1602 kHz and LW 153 - 279 kHz

Press BND to select the waveband of your choice.

Station tuning

Seek tuning /

Press /; the car radio will automati- cally search for the next station.

If you hold / pressed up or down on the rocker switch, seek tuning will speed up in the corresponding direction.

Seek tuning

Manual tuning:

Press << >>; the frequency will change in short intervals in the corresponding direction.

If you hold << >> pressed to the left or the right on the rocker switch, the frequency scan will speed up.

Scrolling through the broadcast networks (FM only)

You can use the << >> keys to tune into stations in your reception area.

If it is possible to receive several program- mes in the same broadcasting network, you

Note:

In the DSC menu it is possible to block MW or LW or both wavebands for station selec- tion.

This can be useful to limit the wavebands available to those you really want to use and reduces the number of times you are requi- red to press BND. If necessary, refer to the information in the section on “DSC Pro- gramming - AM ON or AM OFF”.

Up

Down

<</ >> Up/down in short intervals

(on FM only if “AF” is switched off)

Manual tuning with << >>

You can also tune into a station manually.

Important:

AF and PTY must be switched off (i.e. the symbols do not light up in the display).

If necessary, deactivate these functions:

Press AF or PTY.

can scroll through them by pressing >> (for- wards) or << (backwards), e.g. NDR 1, 2, 3, 4, N-JOY, ...

Important: you must have already tuned into the stations at least once and “AF” must be active (lights up in the display).

To do this, you can start Travelstore:

Press BND for 2 seconds; the system will start to run through the frequency band.

If “AF” is not lit up,

press AF.

It is now possible to select stations using << >>.

ENGLISH DEUTSCH

ÇFRAN AIS

ITALIANO NEDERLANDS SVENSKA

ÑESPA OL

PORTUGU SÊ

15

Page 15
Image 15
Viking TMC 148 operating instructions Radio operation with RDS Radio Data System, Selecting a waveband, Station tuning