GATE OPERATOR INSTALLATION

STEP 4

Remount the geared motor on the chassis accordingly.

STEP 5

Attach the Articulated Arms with the Positive Stop Extension to the Pivot Bracket and the Motor/Gear Assembly.

NOTE - Additional holes are provided in the Pivot Bracket to assist with proper installation

STEP 6

With the cover off, perform the Manual Release procedure as shown at the bottom of page 7. The gate can now be moved manually.

Ensure that the gate and gate operator move freely.

Once it is determined the operator will work properly, remove the operator and complete the welding process.

STEP 7

Remount the gate operator. Lubricate the moving parts (the bushings on the articulated arm) and tighten the self-locking nuts in such a way as to not restrict arm movement. Leave the cover off until the Limit Switches have been adjusted.

Check Operation

Through Entire

Range of

Movment

7

 

 

TECHNICAL SUPPORT 1 800 908 0884

13