Visioneer 3100, 6000, 6100 Plug the power adapter cable into the jack on the PaperPort scanner

Models: 6100 6000 3100

1 22
Download 22 pages 54.2 Kb
Page 6
Image 6
7.Plug the power adapter cable into the jack on the PaperPort scanner.

6PAPERPORT FLATBED SCANNER INSTALLATION GUIDE

NOTE: If you want to “daisy-chain” the scanner and a Zip drive so they share the port, first connect the Zip drive to the computer, then connect the scanner to the Zip drive.

7.Plug the power adapter cable into the jack on the PaperPort scanner.

8.Plug the power adapter into an AC (wall) outlet.

The power-on light on the front of the scanner comes on indicating the scanner is receiving power.

The following diagram show the cable connections.

Power cord

Scanner cable

Printer cable

9.Turn on your computer. You’re ready to begin installing the PaperPort software.

NOTE: On some PaperPort scanners the power-on light remains lit when the computer is turned off. This is normal even though the computer is turned off.

Page 6
Image 6
Visioneer 3100, 6000, 6100 manual Plug the power adapter cable into the jack on the PaperPort scanner