Vita-Mix The Quiet One Depress button 2 within 12 seconds to scroll through the menu settings

Display Window: This area, depending on which button is pressed, displays a variety of operation messages. A “Ready” message appears when there is power to the machine.

Owner Controls: The owner control panel is accessible by activating the Power Switch located on the back of the motor base while depressing button 2.

VITA-MIX CORP

VERSION #201

TEMP COUNT TOTAL

NORM 25 100

TIMER	HR:	MIN:	SS
	0:	10:	33

VITA-MIX ADVANCE

PROGRAM #201

1 TO OVERWRITE

CURRENT PROGRAM

•Once the unit powers up, the display will cycle through three screens. The first indicates the current program version. The second indicates which program is running on the machine. The third will indicate the motor temperature (NORM, WARM, HOT), and the total hours of operation, including production and testing. This time can not be cleared. Once this screen is reached, button 2 can be released.

•Depress button 2 within 12 seconds to scroll through the menu settings.

•The first press will reveal the timer. Total operation is recorded in hours, minutes and seconds; including production and testing. This time cannot be cleared.

•The second press will reveal the name of the program controlling the Pre-Set buttons. If you are using the Advance® settings, this will read

“VITA-MIX ADVANCE PROGRAM.”

•The third press will reveal an option to reset the Pre-Set buttons to the original factory settings.

Pulse Buttons: The pulse provides a quick increase or decrease in speed of the

blade when blending or refreshing a drink. Press to increase the motor to speeds that range from 51%-100%. Press to decrease the motor speed down to a range of 50%-7%. The Pulse button will override the running program as long as it is depressed. Once released, the original program continues its cycle.

•The Pulse High ( ) and Low ( ) speed is set by using the Speed buttons.

To set, while pressing and holding a Pulse button, press the Speedorbutton until the desired motor speed is reached. The pulse speed will remain at this setting until changed again with the Speed buttons.

9