VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the defined threshold.
Percentage = 30%
If you want to configure a motion detection setting for a different scenario, please click Profile to open the Motion Detection Profile Settings page as shown below. A total of three motion detection windows can also be configured on this page.
| 2010/12/10 17:08:56 |
Please follow the steps beolw to set up a profile:
1.Create a new motion detection window.
2.Check Enable this profile.
3.Select the applicable schedule for the current setting. Please manually enter a range of time during which the configuration will take effect.
4.Click Save to enable the settings and click Close to exit the page.
This motion detection window will also be displayed on the Event Settings page. You can go to Event
>Event settings > Trigger to choose Motion Detection as a trigger source. Please refer to page 100 for detailed information.
96 - User's Manual
