VIVOTEK
Connecting Cables
If you need to route cables through the side opening, proceed with the following:
1.Connect the Ethernet and the Power & IO cables. The Ethernet cable is
2.Use the included cable ties to secure the Ethernet and IO cable to the base plate. Insert the cable ties through the vertical mounting tabs on the side of the plastic cover and on the edge of the cabling cutout.
3.Arrange the cables neatly to avoid getting in the way when the dome cover is attached.
4.Cut the extra length from the cable tie.
If you route cables through a drill hole on a wall/ceiling, simply route cables through the cabling cutout.
Power and IO
cablesEthernet
| It is recommended to remove the strain relief boot if your Ethernet cable |
Strain relief boot | comes with one. |
User's Manual - 19
