VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the preset threshold.
Percentage = 30%
If you want to configure other motion detection settings for day/night/schedule mode (e.g., for a different lighting condition), please click Profile to open the Motion Detection Profile Settings page as shown below. Another three motion detection windows can be configured on this page.
| 2010/12/10 17:08:56 |
Please follow the steps beolw to set up a profile:
1.Create a new motion detection window.
2.Check Enable this profile.
3.Select the applicable mode: Day mode, Night mode, or Schedule mode. Please manually enter a time range if you choose Schedule mode.
4.Click Save to enable the settings and click Close to exit the page.
This motion detection window will also be displayed on the Event Settings page. You can go to Event
>Event settings > Trigger to select it as a trigger source. Please refer to page 110 for detailed information.
106 - User's Manual
