Vivotek IB8354-C user manual Virtual input, Return

VIVOTEK

URL Command Document for All Series

8.14 Virtual input

Note: Change virtual input (manual trigger) status.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/setvi.cgi?vi0=<value>[&vi1=<value>][&vi2=<value>] [&return=<return page>]

PARAMETER		VALUE	DESCRIPTION
vi<num>		state[(duration)nstate]	Ex: vi0=1
			Setting virtual input 0 to trigger state
		Where "state" is 0, 1. “0”
			Ex: vi0=0(200)1
		means inactive or
		normal state while “1”	Setting virtual input 0 to normal state, waiting 200
		means active or	milliseconds, setting it to trigger state.
		triggered state.	Note that when the virtual input is waiting for next
		Where "nstate" is next	state, it cannot accept new requests.
		state after duration.
return		<return page>	Redirect to the page <return page> after the
			request is completely assigned. The <return
			page> can be a full URL path or relative path
			according the current path. If you omit this
			parameter, it will redirect to an empty page.
Return Code	Description
200	The request is successfully executed.
400	The request cannot be assigned, ex. incorrect parameters.
	Examples:
	1. setvi.cgi?vi0=0(10000)1(15000)0(20000)1
		No multiple duration.
	2. setvi.cgi?vi3=0
		VI index is out of range.
	3. setvi.cgi?vi=1
		No VI index is specified.

83 User's Manual - 197