Vivotek IB8354-C user manual Joystick settings

Models: IB8354-C

1 207
Download 207 pages 16.65 Kb
Page 30
Image 30

VIVOTEK

Joystick settings

Enable Joystick

Connect a joystick to a USB port on your management computer. Supported by the plug-in (Microsoft’s DirectX), once the plug-in for the web console is loaded, it will automatically detect if there is any joystick on the computer. The joystick should work properly without installing any other driver or software.

Then you can begin to configure the joystick settings of connected devices. Please follow the instructions below to enable joystick settings.

1.Select a detected joystick, if there are multiple, from the Selected joystick menu. If your joystick is not detected, if may be defective.

2.Click Calibrate or Configure buttons to configure the joystick-related settings.

NOTE:

If you want to assign Preset actions to your joystick, the preset locations should be configured in advance in the Configuration > PTZ page.

If your joystick is not working properly, it may need to be calibrated. Click the Calibrate button to open the Game Controllers window located in Microsoft Windows control panel and follow the instructions for trouble shooting.

The joystick will appear in the Game Controllers list in the Windows Control panel. If you want to check out for your devices, go to the following page: Start -> Control Panel -> Game Controllers.

30 - User's Manual

Page 30
Image 30
Vivotek IB8354-C user manual Joystick settings