To change the system name, type in the text box after "Host Name". This name will be displayed at the top of the main page. In the case that only the host name is changed, without adjusting date and time of Network Camera, click on "Keep current date and time".
There are three ways to adjust system date and time. The easiest is to make Network Camera "sync with computer time". The second is to set the date and time manually. Notice the format in the related field while typing. The third is to make Network Camera automatically synchronize with timeservers over the Internet whenever Network Camera starts up. It may fail if the assigned NTP server cannot be reached or it is within a local network. Leaving the NTP server blank will let Network Camera connect to default timeservers. If some specific timeserver is assigned, type it in the text box. Domain name or IP address format is acceptable as long as DNS server is available. Do not forget to set the "Time Zone" offset for
local settings. It only affects the hour in NTP method. Click on 
to validate changes.
43
www.vivotek.com
