VIVOTEK
Wall Mount Bracket Installation
Below is a sample procedure using a wall mount bracket and a pendant pipe:
1.Determine a hard surface ceiling location. Use the four mounting holes on the wall mount bracket to mark the positions where holes will be drilled to secure the bracket and routing cables. Note that screws are
2.Feed cables through the bracket.
3.Install the pendant pipe.
4.Install the camera to the mounting adapter. See Attach Camera to Mounting Adapter on the previous page.
5.Install the mounting adapter to pendant pipe.
6.Tighten the connection using the included hex wrench.
1
6
2 3 
AM-116
AM-212
5
AM-51A
4 
20 - User's Manual
