Vivotek VS8100 Media

VIVOTEK

User's Manual - 37

Media > Image

This section explains how to configure the image settings of the Network Camera. It is

composed of the following four columns: General settings, Image settings, Exposure, and

Privacy mask.

General settings

Video title

Show_timestamp_and video_title_in_video_and_snapshots: Enter a name that will be displayed on the

title bar of the live video as the picture shown below.

Video Title 2013/02/09 17:08:56

Title and Time Video 17:08:56 2013/02/09

Color: Select to display color or black/white video streams.

Video orientation: Flip - vertically reflect the display of the live video; Mirror - horizontally reflect the

display of the live video. Select both options if the Network Camera is installed upside-down (e.g., on the

ceiling) to correct the image orientation. Please note that if you have preset locations, those locations will

be cleared after ip/mirror setting.

Contents

Main Page Page Overview Read Before Use Page Page Status LED Hardware Reset Network Deployment Setting up the Video Server over the Internet Page Page Software Installation Video Server Ready to Use Accessing the Video Server Using Web Browsers Page Using RTSP Players Using 3GPP-compatible Mobile Devices Using VIVOTEK Recording Software Main Page Conguration Area Live Video Window Manual Trigger Area Client settings Page Page Conguration System System > Homepage layout VIVOTEK 28 - User's Manual Theme Options Page System > Logs Internet System > Parameters System > Maintenance Page Page Tips: Media > Image Image settings Page Media > Video Page Page For Constant Bit Rate and other settings, refer to the previous page for details. NOTE: Media > Audio Network > General settings PPPoE (Point-to-point over Ethernet) Page Page Page Page Page Network > Streaming protocols HTTP streaming Page Page Page Network > DDNS Page Page Network > QoS (Quality of Service) Page Network > SNMP Security > User accounts Security > HTTPS (Hypertext Transfer Protocol over SSL) https:// Page Page Page Page Page Security > Access List Filter Administrator IP address Security > IEEE 802.1X Page PTZ > PTZ settings Page Page Page Page Page Event > Event settings 1. 2. Trigger Page server Page Page Page Page Page Page Page Page Applications > Motion detection Follow the steps below to enable motion detection: For example: Page Page Applications > Tampering detection Recording > Recording settings Page Page Page Event Appendix URL Commands for the Network Camera/Video Server 1. Overview 2. Style Convention 3. General CGI URL Syntax and Parameters 4. Security Level 5. Get Server Parameter Values Page 6. Set Server Parameter Values Page 7. Available parameters on the server 7.1 system Group: system Page Page Page 7.1.1 system.info Subgroup of system:info (The fields in this group are unchangeable.) 7.2 status Group: status 7.3 security Group: security 7.4 network Group: network 7.4.1 802.1x Subgroup of network: ieee8021x (capability.protocol.ieee8021x > 0) 7.4.2 QOS Subgroup of network: qos_cos (capability.protocol.qos.cos > 0) Subgroup of network: qos_dscp (capability.protocol.qos.dscp > 0) 7.4.3 IPV6 Subgroup of network:ipv6 (capability.protocol.ipv6 > 0) 7.4.4 FTP Subgroup of network:ftp 7.4.5 HTTP 7.4.6 HTTPS port Subgroup of network:https_port (capability.protocol.https > 0) 7.4.7 RTSP Subgroup of network:rtsp (capability.protocol.rtsp > 0) 7.4.8 RTP port Subgroup of network:rtp 7.4.9 PPPoE Subgroup of network:pppoe (capability.protocol.pppoe > 0) 7.5 IP Filter 7.6 video input 7.6.1 video input setting per channel Group: videoin_c<0~(n-1)> for n channel products, and m is stream number svc is only supported with stream 0. s<0~(m-1)>_mjpeg_priorit framerate, framerate 4/4 The policy to apply when Page s<0~(m-1)>_mjpeg_bitrate 1000~800000 0 6000000 4/4 Set bit rate in bps when choosing cbr in ratecontrolmode. 7.7 image setting per channel Group: image_c<0~(n-1)> for n channel products 7.8 Audio input per channel Group: audioin_c<0~(n-1)> for n channel products (capability.audioin>0) 7.9 Time Shift settings Group: timeshift, c for n channel products, m is stream number (capability.timeshift > 0) 7.10 Motion detection settings Group: motion_c<0~(n-1)> for n channel product 7.11 Tampering detection settings Group: tampering_c<0~(n-1)> for n channel product (capability.tampering > 0) 7.12 DDNS Group: ddns (capability.ddns > 0) <provider>_h ostname string[128] 7.13 Express link 7.14 UPnP presentation Group: upnppresentation 7.15 UPnP port forwarding Group: upnpportforwarding 7.16 System log 7.17 camera PTZ control Group: camctrl (capability.camctrl.httptunnel > 0) Group: camctrl_c<0~(n-1)> for n channel product (capability.ptzenabled) preset_i<0~(npreset-1 )>_ dwelling 0 ~ 999 0 1/4 The dwelling time of each preset location 7.18 UART control Group: uart (capability.nuart > 0) Group: uart_i<0~(n-1)> n is uart port count (capability.nuart > 0) 7.19 SNMP Group: snmp (capability.snmp > 0) 7.20 Layout configuration Group: layout (New version) 7.21 Privacy mask Group: privacymask_c<0~(n-1)> for n channel product 7.22 Capability Group: capability Page Page videoin_nresolution Page transmission_mode Page 7.23 Customized event script Group: event_customtaskfile_i<0~2> 7.24 Event setting Group: event_i<0~2> Page Page 7.25 Server setting for event action Group: server_i<0~4> 7.26 Media setting for event action Group: media_i<0~4> (media_freespace is used internally.) 7.27 Recording Group: recording_i<0~1> Page 7.28 HTTPS Page 8. Useful Functions 8.1 Drive the Digital Output (capability.ndo > 0) 8.2 Query Status of the Digital Input (capability.ndi > 0) 8.3 Query Status of the Digital Output (capability.ndo > 0) 8.4 Capture Single Snapshot 8.5 Account Management 8.6 System Logs 8.7 Upgrade Firmware 8.8 Camera Control (capability.ptzenabled) 8.9 ePTZ Camera Control (capability.eptz > 0) Page 8.10 Recall (capability.ptzenabled) 8.11 ePTZ Recall (capability.eptz > 0) 8.12 Preset Locations (capability.ptzenabled) 8.13 ePTZ Preset Locations (capability.eptz > 0) 8.14 IP Filtering 8.14.1 IP Filtering for ONVIF 8.15 UART HTTP Tunnel Channel (capability.nuart > 0) 8.16 Event/Control HTTP Tunnel Channel (capability. evctrlchannel > 0) 8.17 Get SDP of Streams 8.18 Open the Network Stream 8.19 Senddata (capability.nuart > 0) 8.20 Storage managements (capability.storage.dbenabled > 0) Page Page Page Page Page 8.21 Virtual input (capability.nvi > 0) Page 8.23 Export Files 8.24 Upload Files 8.25 Media on demand (capability.localstorage.modnum > 0) 8.26 Start wireless connection 8.27 Site survey 8.28 Remote Camera Control (capability.remotecamctrl.master > 0) Page 8.29 Upload map file (capability.remotecamctrl.master > 0) 8.30 Export map file (capability.remotecamctrl.master > 0) VIVOTEK User's Manual - 185 Technical Specications Dimensions Compatible Accessories Included Accessories System Information Camera Control Video Technology License Notice Electromagnetic Compatibility (EMC)