VIVOTEK

5. Get Server Parameter Values

Note: The access right depends on the URL directory.

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/anonymous/getparam.cgi?[<parameter>] [&<parameter>…]

http://<servername>/cgi-bin/viewer/getparam.cgi?[<parameter>] [&<parameter>…]

http://<servername>/cgi-bin/operator/getparam.cgi?[<parameter>] [&<parameter>…]

http://<servername>/cgi-bin/admin/getparam.cgi?[<parameter>] [&<parameter>…]

Where the <parameter> should be <group>[_<name>]. If you do not specify any parameters, all the parameters on the server will be returned. If you specify only <group>, the parameters of the related group will be returned.

When querying parameter values, the current parameter values are returned.

A successful control request returns parameter pairs as follows:

Return:

HTTP/1.0 200 OK\r\n Content-Type: text/html\r\n Context-Length: <length>\r\n \r\n

<parameter pair>

where <parameter pair> is <parameter>=<value>\r\n [<parameter pair>]

<length> is the actual length of content.

Example: Request IP address and its response

Request:

http://192.168.0.123/cgi-bin/admin/getparam.cgi?network_ipaddress

106 - User's Manual

Page 106
Image 106
Vivotek VS8100 user manual Get Server Parameter Values