VIVOTEK

Please follow the steps below to link to an IPv6 address:

1.Open your web browser.

2.Enter the link-global or link-local IPv6 address in the address bar of your web browser.

3.The format should be:

http://[2001:0c08:2500:0002:0202:d1ff:fe04:65f4]/

IPv6 address

4.Press Enter on the keyboard or click Refresh button to refresh the webpage. For example:

NOTE:

If you have a Secondary HTTP port (the default value is 8080), you can also link to the webpage using the following address format: (Please refer to HTTP streaming on page 52 for detailed information.)

http://[2001:0c08:2500:0002:0202:d1ff:fe04:65f4]/:8080

IPv6 address

Secondary HTTP port

If you choose PPPoE as the Network Type, the [PPP0 address] will be displayed in the IPv6 information column as shown below.

Manually setup the IP address: Select this option to manually configure IPv6 settings if your network environment does not have DHCPv6 server and router advertisements-enabled routers. If you check this item, the following blanks will be displayed for you to enter the corresponding information:

50 - User's Manual

Page 50
Image 50
Vivotek VS8100 user manual Http//20010c08250000020202d1fffe0465f4