Check Enable this profile | Vivotek VS8100 manual

VIVOTEK

A green bar indicates that even though motions have been detected, the event has not been triggered because the image variations still fall under the preset threshold.

Percentage = 30%

If you want to configure other motion detection settings for day/night/schedule mode (e.g., for a different lighting condition), please click on Profile to open the Motion Detection Profile Settings page as shown below. Another three motion detection windows can be configured on this page.

Video(TCP-AV)	2010/12/10 17:08:56
	2013/2/3 14:39:12

hallway

Please follow the steps beolw to set up a profile:

1.Create a new motion detection window.

2.Check Enable this profile.

3.Select the applicable period of time for the Schedule mode. Please manually enter a range of time.

4.Click Save to enable the settings and click Close to exit the page.

This motion detection window will also be displayed on the Event Settings page. You can go to Event > Event settings > Trigger to select it as a trigger source. Please refer to page 82 for detailed information.

User's Manual - 95

Image 95

Contents

Rev Table of Contents Revision History Package Contents Read Before Use Overview Physical Description Installation Status LED Hardware Reset Network Deployment Setting up the Video Server over the Internet Vivotek Internet connection with static IP Video Server Software Installation Ready to Use Using Web Browsers Accessing the Video Server Vivotek Using Rtsp Players Qcif Using 3GPP-compatible Mobile Devices Using Vivotek Recording Software Main Manual Trigger Area Vivotek Client settings MP4 saving options Joystick settings Configuration System time SystemSystem System Homepage layout General settings Theme Options Vivotek System log Log server settingsSystem Logs Internet System Parameters Access log General settings Reboot System MaintenanceGeneral settings Upgrade firmware Import/Export files General settings Restore Vivotek Tips Media Image Image settings Privacy mask Media Video Stream settings Vivotek Vivotek Vivotek Media Audio Audio Settings Network Type Network General settings PPPoE Point-to-point over Ethernet Error Router does not support UPnP port forwarding Vivotek Enable IPv6 Http//20010c08250000020202d1fffe0465f4 Port Http streaming Network Streaming protocols Rtsp Streaming VLC Vivotek Express link Network Ddns Ddns Dynamic domain name service Manual setup CustomSafe100 Requirements for QoS Network QoS Quality of Service QoS/DSCP the DiffServ model Network Snmp Simple Network Management Protocol Snmp Configuration Account Management Root PasswordSecurity User accounts Privilege Management Security Https Hypertext Transfer Protocol over SSL Create and Install Certificate Method Https Create certificate request and install Vivotek Vivotek Vivotek Vivotek Security Access List Filter IP address range 192.168.2.x will be bolcked Administrator IP address Security Ieee Maximum length of password is 200 symbols Vivotek RS485 settings PTZ PTZ settings Position is set as the center position Preset positions Camera ID settings Patrol settings Custom Command Command buttons will be displayed on the main Event Event Event settings Trigger Action Add server Vivotek Vivotek Format is Yyyymmdd Click to open the directory Format is HH 24r Add media Trigger Activation Video20101213100341 Vivotek Customized Script Applications Motion detection Follow the steps below to enable motion detection Check Enable this profile Vivotek Applications Tampering detection Check Enable camera tampering detection Recording Settings Recording Recording settings Continuous recording NAS server Vivotek 20130210 20130211 20130212 Appendix URL Commands for the Network Camera/Video Server General CGI URL Syntax and Parameters Security Level Get Server Parameter Values Vivotek Value to assigned Assign value to the parameter groupname Set Server Parameter Values Vivotek Available parameters on the server Group system System Vivotek None Vivotek System.info Group status StatusSecurity Group network Network TLS Subgroup of network ieee8021x capability.protocol.ieee8021x Subgroup of network qosdscp capability.protocol.qos.dscp Subgroup of network qoscos capability.protocol.qos.cos Port Subgroup of network ipv6 capability.protocol.ipv6Subgroup of network ftp Subgroup of network http Subgroup of network rtsp capability.protocol.rtsp Https port Subgroup of network pppoe capability.protocol.pppoe Subgroup of network rtp Group videoin IP FilterVideo input IPv6 address list Video input setting per channel CIF 4CIF Svc is only supported with Stream S0~m-1mjpegpriorit Framerate Policy to apply when Cmos Group imagec0~n-1for n channel products Image setting per channel Audio input per channel Group motionc0~n-1for n channel product Time Shift settingsMotion detection settings Tampering detection settings Express link Ddns Group syslog UPnP presentationUPnP port forwarding System log Camera PTZ control Preseti0~npreset-1 Dwelling time of each Preset location Group uarti0~n-1n is uart port count capability.nuart Uart controlGroup uart capability.nuart Group snmp capability.snmp Snmp Group layout New version Layout configuration Group privacymaskc0~n-1for n channel product Privacy maskCapability Vivotek Rtsp Only for 5M series Videoinnresolution Svc VideoinstreamcodecBit 0 mpeg4, Bit Mjpeg, Bit 2 h264, Bit Transmissionmode Product can be upgraded to Group eventi0~2 Event settingCustomized event script Indicate the source id of vi trigger Null Group serveri0~4 Server setting for event action Group mediai0~4 mediafreespace is used internally Media setting for event action Group recordingi0~1 Recording Indicate the prefix of the filename Recording file is truncated When this condition is reachedHttps Unit Mega bytes Vivotek Query Status of the Digital Input capability.ndi Where state can be 0 orDrive the Digital Output capability.ndo Example Query the status of digital input Request Query Status of the Digital Output capability.ndo \r\n Do1=1\r\n Capture Single Snapshot Account Management Method Post Syntax Upgrade FirmwareSystem Logs Return=return Camera Control capability.ptzenabled EPTZ Camera Control capability.eptz Parameter Value Description Recall capability.ptzenabled EPTZ Recall capability.eptz Preset Locations capability.ptzenabled EPTZ Preset Locations capability.eptz IP Filtering Type Uart Http Tunnel Channel capability.nuart Channel ~ n-1 Channel number of Uart Event/Control Http Tunnel Channel capability Open the Network Stream Get SDP of Streams Senddata capability.nuart Command search Storage managements capability.storage.dbenabled Locked file would not be removed from UI or cyclic Indicate if the file is locked or notFile is not locked File is locked Return Message Vivotek Ex. Local storage status in javascript format Command queryStatusEx. Local storage status in XML format FilePath is in queryststus return message Http//servername/cgi-bin/admin/downloadMedias.cgi?FilePath Virtual input capability.nvi Open Timeshift Stream capability.timeshift Timeshiftenable=1, timeshiftcnsmallow=1 Currentlanguage ~20 Export Files Method Post Upload Files Start time Etime Stime Site survey Start wireless connection Remote Camera Control capability.remotecamctrl.master 0x000000C8 200 Control auxiliary Camera Controller 0x000001F6 502 Function is Disabled Upload map file capability.remotecamctrl.master Technical Specifications Technical Specifications AMR-NB Standard Technology License Notice Liability Electromagnetic Compatibility EMC