Vizio 210C manual Registering a New Access Code

Registering a New Access Code

4 Using the digital keys, enter the desired access code (5 digits) into the fields of NEW ACCESS CODE and CONFIRM ACCESS CODE, and press the SET key.

-You cannot enter an access code which has already been registered. The administrator password and “00000” are invalid.

5 Key in the upper limit ( 7 digits) you want to set on the number of copies with the digital keys, and then press the SET key.

-The copy limitation is the total number of “full colour + monocolour + black”. Key in the number between 0000000 and 9999999.

-If the number of copies has exceeded the set limitation, no more copies can be made under this access code after the current operation has been completed.

-To make the copy operation available again, key in a num- ber of limitation larger than the current one, or reset the

number to 0 (zero) by the clear counter function ( Page 6-27).

-Press the DISABLE key if the limitation to the new depart- ment is not necessary, and then press the SET key.

Changing an Access Code / Changing the Limit Number of Copies by an Access Code

4 Using the digital keys, enter the current access code (5 digits) of the department you want to change, and press the SET key.

5	Press the ID CHANGE or LIMITATION key.
	- When the ID CHANGE key is selected, go to step 6; when

the LIMITATION key is selected, go to step 7 on the next page.

6

6-25