5. CLEAR PAPER SYMBOL (Cont.)

If the CLEAR PAPER symbol flashes as shown on the right, be sure to carry out step 6. If this action is not sufficient, the paper may be torn or be left in the copier.

7 Turn the knob in the direction of the arrow (clock- wise) and pull out the transfer belt unit.

8 Remove any misfed paper on the transfer belt.

Caution

Do not touch the transfer belt. Touching it may cause image failure.

Fuser unit

Transfer belt

 

If the misfed paper is gripped between the rollers,

9

9 remove it by rotating the lever in the direction shown.

10 If the misfed paper cannot be removed in step 9, raise the exit guide of the fuser unit and remove it.

Exit guide

9-14WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL

Page 156
Image 156
Vizio 210C If the misfed paper is gripped between the rollers, Remove it by rotating the lever in the direction shown