Vizio 210C manual 16Press the Scan! key or the Start key on the control panel, Selecting Holdqueue

1. SCANNING THE IMAGE DATA (Cont.)

Scan Setting on the Touch Panel (Cont.)

16Press the Scan! key (or the START key on the control panel).

-Scanning starts and the image data are transmitted to the entered mail address after the scanning operation has been completed.

-When the originals are set on the original glass , perform the operation on page 8-9 continually.

-The volume of the high-resolution image data may be very large. When selecting ATTACHMENT , be careful not to ex- ceed the mail server capacity of both the transmitter and the receiver.

-When changing the sender’s address or the mail server ca- pacity, etc., refer to the Operator’s Manual for the Printer Con- troller (User Document CD-ROM).

Selecting HOLDQUEUE

If you want to use the scanned data at the ‘Command WorkstationTM’ or ‘WebSpoolerTM’, select the HOLDQUEUE key.

10Press the HOLDQUEUE key.

-If you want to store in the ‘Mailbox’ or ‘E-mail’ as well, make the settings for each destination before pressing the Scan! key.

8

11Press the Scan! key (or the START key on the control panel).

-Scanning starts.

-When the originals are set on the original glass continually, perform the operation on page 8-9.

8-8NETWORK SCANNING FUNCTION (USING THE OPTIONAL PRINTER CONTROLLER)