Vizio 210C manual Enter the distance values read in for, Fied area

4 When centring a part of an original, place the origi- nal on the glass to specify the area.

- Set the original face up with the bottom toward you, fit its top left corner against the top left corner of the glass, and align it with the original scale.

5 Using the original scale on the left and the inner (top) scale, read the position of the desired area, as fol- lows:

-X1 Distance from the top left to the left edge of the specified area.

-X2 Distance from the top left to the right edge of the speci- fied area.

-Y1 Distance from the top left to the upper edge of the speci- fied area.

-Y2 Distance from the top left to the lower edge of the speci-

fied area.	5
Enter the distance values read in step 5 for the
6 specified area.

-Key in the value for X1 with the digital keys and press the upper SET key.

-Similarly, set the values for X2, Y1 and Y2.

7 Press the lower SET key.

8 Place the original(s) on the glass face down and with its bottom toward you and with its top left aligned against the original scale on the left side. Page 2-9

Select other copy modes as required.

9 Press the START key.

5-19