10Reinstall the stapler unit in its previous position and turn the blue lever 90o to the right to latch the sta- pler unit.

11Confirm that the finisher is attached to the copier, and that the paper size is set to any size other than A5-R or B5-R.

-Test stapling cannot be performed when only A5-R or B5-R paper is available.

12Close the front cover of the finisher. Test stapling is then automatically performed on a blank sheet.

- This operation is performed to avoid empty stapling.

If test stapling fails to be performed and the following mes- sage remains displayed, repeat the above procedure from steps 1 to 12.

Set staple cartridge

Saddle Stitch Unit (MJ-1020 only) 1 Open the lower cover of the finisher.

9

9-23

Page 165
Image 165
Vizio 210C manual