Vizio VBR140 warranty

Connecting to a Wireless Network

For the most reliable network performance, a wired connection is recommended.

To connect to a wireless network:

1.Ensure you have:

•A router broadcasting a high-speed wireless signal (802.11n recommended)

•A high-speed Internet connection

2.Press the Power button on the remote to turn the player on. Turn your TV on and select the input to which the Blu-ray player is connected.

3.Use the Left/Right Arrow buttons on the remote to highlight Settings, then press OK.

4.Use the Up/Down Arrow buttons on the remote to highlight Network, then press OK.

5.Use the Up/Down Arrow buttons on the remote to highlight Connection Type, then press OK.

6.Use the Up/Down Arrow buttons on the remote to highlight Wireless, then press OK. A confirmation window is displayed, highlight Yes to continue.

7.Use the Up/Down Arrow buttons to select Scan to have your player search for available wireless networks.

8.If your network is password-protected, enter your password using the buttons on the remote. When you are finished select Enter, and then Next to continue.

9.When your player has connected, a success message is displayed. Select OK to complete the wireless setup.

1

Connecting to a Wireless Network with WiFi Protected Setup (WPS)

Ethernet cables are available from many retailers in lengths of up to 50 feet.

Wi-Fi Protected Setup is an easy way to connect the Player to your home wireless network.

To connect using WPS:

1.Ensure you have:

•A router with a WPS button, broadcasting a high-speed wireless signal (802.11n recommended)

•A high-speed Internet connection

2.Press the Power button on the remote to turn the player on. Turn the TV on and and select the input to which the Blu-ray player is connected.

3.Use the Left/Right Arrow buttons on the remote to highlight Settings, then press OK.

4.Use the Up/Down Arrow buttons on the remote to highlight Network, then press OK.

5.Use the Up/Down Arrow buttons on the remote to highlight Connection Type, then press OK.

6.Use the Up/Down Arrow buttons on the remote to highlight Wireless, then press OK. A confirmation window is displayed, highlight Yes to continue.

7.Use the Up/Down Arrow buttons to select Auto WPS.

8.Follow the on screen instructions to complete the WiFi Protected Setup.

7