
Troubleshooting
| Problem | Suggestion | 
| My cordless handset | • Make sure the power cord is securely plugged into the telephone base. Plug the unit into a | 
| beeps and is not | different working electrical outlet not controlled by a wall switch. | 
| performing normally. | • Move the cordless handset closer to the telephone base. It may be out of range. | 
| 
 | • Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and | 
| 
 | plug it back in again. Allow up to one minute for the cordless handset and the telephone base | 
| 
 | to synchronize. | 
| 
 | • Other electronic products can cause interference to your cordless telephone. Try installing | 
| 
 | your telephone as far away from these electronic devices as possible: wireless routers, radios, | 
| 
 | radio towers, pager towers, cellular telephones, intercoms, room monitors, televisions, personal | 
| 
 | computers, kitchen appliances and other cordless telephones. | 
| 
 | 
 | 
| Common cure for | • If the unit is not responding normally, try putting the cordless handset in the telephone base. | 
| electronic equipment | If it does not seem to respond, try the following (in the order listed): | 
| 
 | • Disconnect the power to the telephone base. | 
| 
 | • Disconnect the battery on the cordless handset. | 
| 
 | • Wait a few minutes before connecting power to the telephone base. | 
| 
 | •  | 
| 
 | • Wait for the cordless handset to synchronize its connection with the telephone base. Allow up | 
| 
 | to one minute for this to take place. | 
| 
 | 
 | 
| 38 | www.vtechphones.com | 
